Canon imageCLASS MF4100 Series, Service Manual

Page: 126 / 140

Chapter 13
13-4
F-13-5
13.2 Service Soft Switch Settings (SSSW)
13.2.1 Outline
13.2.1.1 SOFT SWITCH Explained
0014-6087
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
Each entry / setting item of SOFT SWITCH consists of 8 bitswitches. Each bitswitch displayed on the screen has an assigned number as shown in the figure below.
Each Bit has a value - either 0 or 1.
F-13-6
Shown below is what each number and data indicates in the bitswitch table.
F-13-7
CLEAR DATA DRAM CLEAR
MEMORY CLEAR
PRINT COUNTER
SCAN COUNTER
H/W TEST SIGNAL TEST
RELAY TEST
SENSOR TEST
DIAL TEST
VOLUME TEST
KEY TEST
AGING
CIS TEST
BOOK SCAN TEST
COPY TEST
JPN PSUDO RING
ADF SCAN TEST
IR SCAN TEST
FUNCTION PRINT TEST PATTERN CONT. PRINTING BLACK
E
FIX
ASF
WHITE
SQUARE ON
OFF
REPORT SERVICE DATA LIST
SW01 0 0 0 0 0 0 0 0
Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Bit 7 Bit 8
Not in Use
Not in Use
Original Reading Width
Not in Use
Not in Use
Not in Use
Not in Use
Not in Use
Letter
Function
1
2
3
4
5
6
7
8
Bit 1 0
Indicates the
set value is '1.'
Indicates this is
the default setting.
Indicates the
set value is '0.'
A4*