1
2
3
4
5
6
4-4
●
RESULT: Result of transaction
– OK: Transmission successful
– NG: Transmission failed
– STOP: Transmission manually canceled before completion
– MEM.FULL: Memory became full during transmission
– NO ANSWER: Call not answered
●
Error code: For descriptions of error codes, see Chapter
11, “Troubleshooting,” in the Basic Guide.
■
RX RESULT REPORT
1.
Press [Additional Functions].
2.
Use [
] or [
] to select <REPORT
SETTINGS>, then press [OK].
3.
Use [
] or [
] to select <SETTINGS>,
then press [OK].
4.
Use [
] or [
] to select <RX RESULT
REPORT>, then press [OK].
5.
Use [
] or [
] to select the setting you
want, then press [OK].
<OUTPUT NO>: Does not print a report.
<OUTPUT YES>: Prints a report every time you receive a
document.
<PRINT ERROR ONLY>: Prints a report only when a reception
error occurs.
6.
Press [Stop/Reset] to return to standby
mode.
Report Items
The following items are displayed in the Reception Result
Report:
●
JOB NO.: Job number
●
TYPE: Type of reception
– RX: Memory or print reception
●
NO.: Sequence number
●
DESTINATION TEL/ID: Name and number of the sending
machine (displayed only if registered in their machine)
●
DATE: Date of transaction
●
TIME: Time of transaction
●
PAGE: Number of pages received
●
DURATION: Amount of time taken for a transaction
●
MODE: Mode of transaction (G3 or ECM)
