1
2
3
4
5
6
4-5
●
RESULT: Result of transaction
– OK: Reception successful
– NG: Reception failed
– STOP: Reception manually canceled before completion
– MEM.FULL: Memory became full during reception
●
Error code: For descriptions of error codes, see Chapter
11, “Troubleshooting,” in the Basic Guide.
■
ACTIVITY REPORT
1.
Press [Additional Functions].
2.
Use [
] or [
] to select <REPORT
SETTINGS>, then press [OK].
3.
Use [
] or [
] to select <SETTINGS>,
then press [OK].
4.
Use [
] or [
] to select <ACTIVITY
REPORT>, then press [OK].
5.
Use [
] or [
] to select the setting you
want, then press [OK].
<OUTPUT YES>: Prints a report after every 60 transactions.
<OUTPUT NO>: Does not print a report.
6.
Press [Stop/Reset] to return to standby
mode.
Report Items
The following items are displayed in the Activity Report:
●
NO.: Transaction number (01 to 60)
●
JOB NO.: Job number
●
DATE: Date of transaction
●
TIME: Time of transaction
●
TX/RX: Type of transaction (transmission or reception)
●
DESTINATION TEL/ID: Name and number of recipient
●
PAGE: Number of pages sent or received
●
DURATION: Amount of time taken for a transaction
●
MODE: Mode of transaction (G3 or ECM)
●
RESULT: Result of transaction (OK or NG) and error code
if applicable
●
TOTAL TX PAGE, DURATION: Total number of pages sent
and total time to send them
●
TOTAL RX PAGE, DURATION: Total number of pages
received and total time to receive them
