Canon imageclass MF244DW User Manual Download Page 49

Page: 49 / 477

●

Very thin paper

●

Paper printed by a thermal transfer printer

●

Highly textured paper

●

Glossy paper

Paper handling and storage

●

Store the paper on a flat surface.

●

Keep the paper wrapped in its original package to protect the paper from moisture or dryness.

●

Do not store the paper in such a way that may cause it to curl or fold.

●

Do not store the paper vertically or stack too much paper.

●

Do not store the paper in direct sunlight, or in a place subject to high humidity, dryness, or drastic
changes in temperature or humidity.

When printing on paper that has absorbed moisture

Steam may emit from the paper output area, or water droplets may form on the back side of the

operation panel or around the paper output area. There is nothing unusual about any of these

occurrences, which occur when the heat generated from fixing toner on the paper causes moisture in the

paper to evaporate (most likely to occur at low room temperatures).

LINKS

Registering a Custom Paper Size(P. 55)

Basic Operations

Summary of Contents for imageclass MF244DW






























































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass MF244DW

Reviews:

Brands by name

Popular brands

Canon imageclass MF244DW, User Manual

Search results

Summary of Contents for imageclass MF244DW

Reviews:

Brands by name

Popular brands