manualshive.com logo in svg

Canon imageclass MF244DW, User Manual

Share
Download
Canon imageclass MF244DW User Manual Download Page 391

5

Using a lint-free clean, soft, dry cloth, wipe away toner/paper dust from the inside.

6

Install the toner cartridge.

●

Align the right and left projections (

) with the toner cartridge guides, and push securely all the way in.

7

Close the toner cover, and lower the operation panel.

If you cannot close the toner cover

Make sure that the toner cartridge is inserted properly. Forcing it closed may cause damage.

8

Reconnect the power cord and turn ON the machine.

Maintenance

385

Summary of Contents for imageclass MF244DW






























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands