manualshive.com logo in svg

Canon imageclass MF244DW, User Manual

Share
Download
Canon imageclass MF244DW User Manual Download Page 388

Feeder 

15A8-06H

Dust and graphite powder may adhere to the roller inside the feeder and cause smudges to appear on printouts. To

clean the feeder, perform the following procedure.

1

Turn OFF the machine, and unplug the power cord from the AC power outlet.

●

When you turn OFF the machine, data that is waiting to be printed is deleted.

2

Open the feeder cover.

3

Wipe roller ( ) inside feeder.

●

Clean the areas with a well-wrung-out cloth dampened with water. Then, wipe the area with a soft, dry cloth.

4

Gently close the feeder cover.

5

Reconnect the power cord and turn ON the machine.

Maintenance

382

Summary of Contents for imageclass MF244DW






























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands