manualshive.com logo in svg

Canon imageclass MF244DW, User Manual

Share
Download
Canon imageclass MF244DW User Manual Download Page 262

[User Name]

Enter up to 24 alphanumeric characters for the user name.

[Change Password]

To set or change the password, select the check box and enter up to 24 alphanumeric characters for the

new password both in the [Password] and [Confirm] text boxes.

6

Click [OK].

7

Restart the machine.

●

Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.

Using the operation panel

●

You can also enable or disable IEEE 802.1X authentication from <Menu>.  IEEE 802.1X Settings(P. 296)

LINKS

Configuring Settings for Key Pairs and Digital Certificates(P. 257)

Security

256

Summary of Contents for imageclass MF244DW






























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands