Canon imageCLASS MF212w, User Manual

Page: 11 / 236

11
En
Connecting the Power Cord and Turning ON
the Power
OFF
1
2
ON
Do not connect the USB cable at this time. Connect it when
installing software.
Specifying the Initial Settings
Follow the instructions on the screen, set the language and
time*. For details on navigating the menu and how to input the
numbers, see “Navigating the Menu and Text Input Method”
( P.10).
●
MF212w
Language
Czech
Danish
Dutch
English
Current Time Set.
08/08 2014 12:52 AM
(0:00-12:59)
●
MF211
Language
Czech
Danish
Dutch
English
Copy: Press Start
100% A4
Density: 0
Original Type: Text
...
Copy Ratio: 100% (1
...
1
+
-
1
*MF212w Only
Choosing the Method to Connect the
Machine to the Computer
●
Connecting via a Wired LAN (MF212w Only)
You can connect the machine to the computer through a
wired router. Use the LAN cables to connect the machine to
the wired router (access point).
Make sure that there is an available port in the router to connect
the machine and the computer.
Have a LAN Cable of Category 5 twisted-pair cable or higher ready.
●
Connecting via a USB cable
You can connect the machine to the computer using a USB
cable.
Make sure that the USB cable you use has the following
mark.
●
Connecting via a Wireless LAN (MF212w Only)
You can connect the machine to the computer through a
wireless router*. Since it is connected to wireless, no LAN
cables are needed.
* A wireless router (access point), which supports IEEE802.11b/g/n,
is required.
If you do not sure whether your router is wireless or
wired:
See the instruction manual provided with your network
device, or contact the manufacturer.
Choosing the Method to Connect:
Via Wireless LAN or Other Method
●
MF212w
Use wireless LAN to
connect to network?
(Can config. later.)
Yes No
Current Time Set.
Must rechg. battery
for 24 hours to save
time settings. After
turning main power
Yes
No
Connect to the computer via a wireless LAN
immediately
Start from step 4 of “Setting Wireless LAN” in the
Wireless LAN Setting Guide.
Connect to the computer via a wired LAN
Proceed to “Connecting via a Wired LAN (MF212w Only)”
(P.12).
Connect to the computer via a USB cable
Proceed to “Connecting via a USB Cable” (P.12).
●
MF211
Connect to the computer via a USB cable
Proceed to “Connecting via a USB Cable” (P.12).