Canon ImageCLASS 2300, Basic Manual, Page: 41 / 156

Placing Originals (For Copying, Faxing, Scanning) 2-6
Documents
2
Feeder
Place a stack of originals in the feeder, and press [Start]. The machine
automatically scans them.
You can place the following originals in the original supply tray:
IMPORTANT
Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals that might not feed smoothly
- Transparencies and other highly transparent originals
Avoid scanning the same original using the feeder more than approximately 30 times.
Scanning the same original repeatedly may result in the original becoming folded or torn,
which in turn could cause a paper jam.
If the feeder rollers are dirty from scanning an original written in pencil, perform the
feeder cleaning procedure. (See Chapter 6, "Routine Maintenance," in the
Reference
Guide .)
1
Neatly place your originals face up in the original supply tray.
If you are enlarging LTR originals to 11" x 17" or LGL paper, place your
originals horizontally.
Item Specifications
Weight
10 to 32 lb bond (37 to 128 g/m
2
)
Place very thin originals 10 to 14 lb bond (37 to 51 g/m
2
), or very thick
originals 28 to 32 lb bond (105 to 128 g/m
2
) into the feeder one at a time.
Size
11" x 17" , LGL , LTR , LTR , or STMT .
Tray Capacity 50 sheets (LTR or smaller)
25 sheets (LGL or larger)