Canon IMAGE FORMULA DR-6010C User Manual Download

Page: 46 / 142

Chapter 3

Basic Operation

3-16

3-5 CapturePerfect 3.0

This section describes the flow of the CapturePerfect 3.0 application.

For more information on CapturePerfect 3.0, see the

CapturePerfect 3.0 Operation Guide

and the

CapturePerfect 3.0 online Help

. Familiarize yourself with CapturePerfect 3.0 by reading these

sources before using the application.

What is CapturePerfect 3.0

CapturePerfect 3.0 is an ISIS-compatible application developed for Canon document scanners.

CapturePerfect 3.0 includes the following modes. Select the desired scan mode from the Scan menu

to perform scanning.

Scan Batch to File

Documents are scanned with the preset scanning conditions, and the scanned image data is

saved to a specified folder.

Scan Batch to Print

Documents are scanned with the preset scanning conditions, and the scanned image data is

printed on a specified printer.

Scan Batch to Mail

Documents are scanned with the preset scanning conditions, the e-mail software application is

started, and the scanned image data is attached to a new e-mail message.

Scan Page

Only one page of the document is scanned.

Scan Batch to Print

Send the scanned image data
to print on a specified printer.

Scan Batch to File

Save the scanned image data
as a file in a specified folder.

DR-6010C

Scan Batch to Mail

Start up your e-mail program, and
attach the scanned image data to a
new e-mail message.

(Network)

Summary of Contents for IMAGE FORMULA DR-6010C















































































































































Search results

Summary of Contents for IMAGE FORMULA DR-6010C

Reviews:

Related manuals for IMAGE FORMULA DR-6010C

Brands by name

Popular brands

Canon IMAGE FORMULA DR-6010C, User Manual

Search results

Summary of Contents for IMAGE FORMULA DR-6010C

Reviews:

Related manuals for IMAGE FORMULA DR-6010C

Brands by name

Popular brands