manualshive.com logo in svg

Canon im2520f, User Manual, Page: 70 / 112

Share
Download
Canon im2520f User Manual Download Page 70

6.6 Various Transmission Settings

6

im2520f

6-25

Trans

m

it

ting Various Faxes

Chap

te

r 6

5

Select the stamping method from 
[Bottom], [Top&Bottom] and 
[OFF].

6

Designate the destination.

❍

Designation using the one-touch keys (See p. 6-2).

❍

Performing dial transmission (See p. 2-3).

❍

Designation using the fax program (See p. 6-5).

7

Press the [Start] key.

❍

During real-time and manual transmission, the stamp is applied after 
successful transmission to the destination.

❍

During memory transmission, the stamp is applied to pages properly stored 
in the memory.

✎

Tip

Whether or not to place a stamp, and its location can be changed in the Admin.2 
screen. Default settings are “OFF” and “Top&Bottom”.
For details, refer to Configuring Functions (Soft Switches) of “Settings and FAX 
Items for the Administrator” in the Advanced Operations volume.

the orientation of the original

Bottom

Top & Bottom

ND-L_Fax_MC.book  Page 25  Saturday, August 9, 2003  10:35 AM

Summary of Contents for im2520f

















































































































Reviews:

No comments