Canon im2520f, User Manual, Page: 58 / 112

6.6 Various Transmission Settings 6
im2520f 6-13
Trans
m
it
ting Various Faxes
Chap
te
r 6
Checking transmission results
Transmission results can be output in a report. The activity report output can be se-
lected from among default/output/no output/at failure.
Outputting the activity report
1
Set the original on the original feed device or the original glass.
2
Press the [Fax/Scan] key.
3
Touch [FAX Menu].
4
Touch [Set 1], then touch [TX
Report].
5
Select the report output method,
then touch [Enter].
❍ When [Default] is indicated,
the TX report is output as set in
Utility/ Admin.1.
❍
When [ON] is indicated, the TX
report is output irrespective of
transmission results.
❍ When [If TX Fail] is indicated,
the TX report is output only
when transmission is not
possible.
❍ The TX report is not output
when [OFF] is indicated.
6
Designate the destination.
❍ Designation using the one-touch keys (See p. 6-2).
❍ Performing dial transmission (See p. 2-3).
❍ Designation using a fax program (See p. 6-5).
ND-L_Fax_MC.book Page 13 Saturday, August 9, 2003 10:35 AM