Canon im2520f User Manual Download Page 22

2.2 Performing Dial Transmission

2

im2520f

2-3

Basic Transmiss

ion

Chapter 2

2.2

Performing Dial Transmission

About dial transmission

When setting in the paper feed tray

1

Set the original in the paper feed 
tray.

Item

Explanation

Dial Transmission

When the fax machine is transmitting/receiving another document, the 
original is first scanned. When the transmission/reception is complete, 
the destination address is dialed, and the document is transmitted.

When the Destination Is Busy

If the recipient’s line is busy, or the call can not be completed, the 
machine can automatically redial (auto redial). If another document is 
reserved for transmission, the reserved document is transmitted, and 
auto redial is carried out.

When the Memory Remaining 
Is Low

If there are many documents accumulated in the memory, transmission 
may not be possible. In such case, wait for the memory remaining to 
increase, or use real-time transmission.

When Using an IP Phone

The communication quality may degrade on IP phones due to the 
condition of the line (such as ADSL) and Internet connection. In 
particular, normal fax transmission may not be possible.
If errors occur frequently when using the fax machine over the IP 
phone, transmit/receive the document over the PSTN.
For the procedure of transmitting fax over the PSTN, see the operation 
manual of the IP phone connection device that you are using or contact 
your IP phone company.

When Using a PBX Using 
VoIP Technology

In the case of a PBX using VoIP technology, configuration must be 
made on the PBX switch to connect the facsimile.

When Using Direct Dialing to 
Communicate with Overseas 
Destinations

If the country code and destination number are entered after the 
international code, you may hear a busy tone during dialing and 
transmission may not be possible.
In such cases, press the [Pause] key twice after entering the 
international code to insert an approx.-6-second pause, and then enter 
the rest of the number. If this still fails to connect the call, perform 
manual transmission.

When Transmission Fails

If transmission fails such as when the destination fax is busy, a TX 
report is printed. TX reports are not printed for real-time transmission.
You can resend documents that could not be initially sent (Max. 20 
documents).

ND-L_Fax_MC.book  Page 3  Saturday, August 9, 2003  10:35 AM

Summary of Contents for im2520f

















































































































Reviews: