Trouble?
89
Addit
ion
al Inf
o
rm
at
io
n
SET PRINT ORDER
No still image on the memory card has been marked with a print order.
READJUST TRIMMING
You changed the print style after you set the trimming settings.
PRINTER ERROR
Cancel printing. Turn the printer off and then on again. Check the printer
status. If the error still persists, refer to the printer’s instruction manual and
contact the appropriate customer support center or service center.
HARDWARE ERROR
Cancel printing. Turn the printer off and then on again. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on.
COMMUNICATION
ERROR
The printer is experiencing a data transfer error. Cancel printing.
Disconnect the USB cable and turn off the camcorder and the printer. After
a short while, turn them on again, set the camcorder to
mode
and restore the connection. When you are printing using the
button,
check the print settings. Or, you attempted to print from a memory card that
contains a large number of images. Reduce the number of images.
CHECK PRINT SETTINGS The print setting cannot be used for printing with the
button.
PRINTER IN USE
The printer is in use. Check the printer status.
PAPER LEVER ERROR
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
PRINTER COVER OPEN
Close the printer cover securely.
NO PRINTHEAD
No print head is installed in the printer or the print head is defective.
Message
Explanation/Solution
CO
PY
