Canon HJ14EX4.3B IRSE, Operation Manual

Page: 44 / 114

■
■
■
■
■
■
Mounting holes (4-M3 depth 6)
E10
3 HOW TO MOUNT
ITS-RE type
ITS-RE Type Lenses
3-3. MOUNT ON THE SUPPORTING UNIT
There are four mounting screw holes on the remote control type lenses for fixing the lens on the
supporting unit.
Mount the lens on the supporting unit,etc., as
instructed below.
1
Use the lens mounting screws on the supporting
unit, etc., to secure the lens on the supporting
unit through the mounting screw holes on the
bottom of the lens body.
NOTE
For details on how to mount the lens on the
supporting unit, etc., refer to the manual that was
provided with the supporting unit, etc.
3-4. CONNECT THE EXTENDER CONTROL CABLE
Connect the extender control cable as described below.
1
Connect the extender control cable to the 6-pin
extender remote connector located on the left
side of the lens body (when viewed from the
camera side).
↓
2
Next, connect the other end of the cable to the
extender remote controller.
NOTE
1. Please prepare an extender remote controller and
an extender control cable at customer's side.
2. For details on how to connect the extender control
cable to the extender remote controller, refer to
the manual that was provided with the extender
remote controller.
3-5. TURN IT ON
Turn on the camera, and the power of the lens will be supplied.
M
I
A F
Extender remote connector (6-pin)