Canon HD XS HJ15ex8.5B, Operation Manual

Page: 53 / 118

LENSES
E19 E19
5 OPERATION
5-1-5. Speed Preset
Allocate the “Sped” function to VTR, RET or AUX switch. In this manual, operations are
described on the assumption that “Sped” function was allocated to the VTR switch.
1. How to preset the zoom speed and direction
Operate the zoom rocker seesaw to determine the zoom
speed and direction (toward telephoto angle or widest
angle) which you want to store, and press the MEMO
button. The zoom speed and direction are stored.
The stored zoom speed is applied to the framing
preset.
2. How to operate the speed preset function
When the “Sped” button is pressed, the zoom starts to move at the preset speed and to the determined
direction (toward telephoto angle or widest angle) stored in section 1 until the zoom reaches its end.
3. How to cancel movement in Speed Preset
Movement in Speed Preset can be canceled by any of the following operations.
1
） Press the "Sped" button again. → Zoom movement stops.
2 ） Performing zoom operation with the zoom rocker seasaw / the "Shtl" button / "Fr1P", "Fr2P", "Fr1F" or "Fr2F"
button.
MEMO Button
Zoom Rocker Seesaw
“Sped” Button
When the switch is once pressed, the zoom moves to its end, and stays there. It is not necessary to holding
down the switch as for the Shuttle-Shot Function.