Canon H1 Service Manual Download

Page: 5 / 112

1-5

Periodic Servicing -----------------------------------------------------------------2-27

List of Work for Scheduled Servicing ------------------------------------3-2

Parts Replacement and Cleaning Procedure

List of Parts(Reader) ---------------------------------------------------------4-2

External Covers -------------------------------------------------------------------- 4-2
List of Electrical Components --------------------------------------------------- 4-2

External Covers(Reader) ----------------------------------------------------4-3

Removing the Reader Left Cover ---------------------------------------------- 4-3
Removing the Reader Front Cover -------------------------------------------- 4-3
Removing the Reader Right Cover -------------------------------------------- 4-3
Removing the Reader Rear Cover -------------------------------------------- 4-3

Original Exposure System (Reader) -------------------------------------4-4

Removing the Platen Glass ----------------------------------------------------- 4-4
Removing the ADF Scan Glass ------------------------------------------------ 4-5
Removing the CCD Unit ---------------------------------------------------------- 4-6
Cleaning in the CCD unit (Mirror No. 1 - 5) ---------------------------------4-10
Removing the Reader Controller PCB --------------------------------------- 4-11
Removing the Reader Assembly ----------------------------------------------4-12

List of Parts (DADF) -------------------------------------------------------- 4-15

External Covers (DADF) -------------------------------------------------- 4-18

Removing the Front Cover -----------------------------------------------------4-18
Removing the Rear Cover ------------------------------------------------------4-18
Removing the Feeder Cover ---------------------------------------------------4-19

Main Units (DADF) ---------------------------------------------------------- 4-20

Removing the Feed Unit --------------------------------------------------------4-20

Consumable Parts Requiring Periodic Replacement and Cleaning

Points (DADF) --------------------------------------------------------------- 4-22

Removing the Pickup Roller Unit ---------------------------------------------4-22
Removing the Separation Pad -------------------------------------------------4-23
Replacing the Stamp -------------------------------------------------------------4-23
Exchanging the Feed Guide ---------------------------------------------------4-24

Clutch Solenoid Motor Fan PCB (DADF) ----------------------------- 4-25

Removing the left hinge ------------------------------------------------------------------4-35
Removing the Right hinge ---------------------------------------------------------------4-35

Removing the Platen roller -----------------------------------------------------4-36

Adjustment

Overview (Reader) ------------------------------------------------------------5-2

When replacing parts (Reader) --------------------------------------------5-2

Platen Glass --------------------------------------------------------------------------------- 5-2
ADF Scan Glass ---------------------------------------------------------------------------- 5-3
CCD Unit -------------------------------------------------------------------------------------- 5-3

Overview (DADF) -------------------------------------------------------------5-6

Outline -------------------------------------------------------------------------------- 5-6

Adjustment Method (DADF) ------------------------------------------------5-7

Preparation or Creation of Test Chart ----------------------------------------- 5-7
Adjusting the Height of the hinge ---------------------------------------------- 5-7

Summary of Contents for H1

















































































































Search results

Summary of Contents for H1

Reviews:

Related manuals for H1

Brands by name

Popular brands

Canon H1, Service Manual

Search results

Summary of Contents for H1

Reviews:

Related manuals for H1

Brands by name

Popular brands