Canon GP200, Online Manual

Page: 346 / 877

Preparing to Transfer the Printer
To protect the internal parts in transit, always follow these steps before transferring the printer to a new
location.
For details on installing printer after transfer, see Reinstalling the Printer .
Important
• Avoid tilting the printer excessively in transit. This may cause ink in the printer to leak and cause stains.
Note
• The maintenance cartridge replacement may be required when you execute the Prepare to
move menu. Prepare the maintenance cartridge in advance while referring below. The number
of maintenance cartridge required varies depending on the amount remaining in the maintenance
cartridge being used.
• If you can move the printer in a level state using casters or something similar, you do not need to
execute Prepare to move .
• Always follow the instructions of the service representative when preparing to transfer the printer. •
The following lists transport restrictions by type of transport.
Move on the same floor
Usage Examples: Move indoors by carrying
Transport and storage in low temperature environments: No
Required maintenance cartridges: 1
Transport outdoors
Usage Examples: Transport by vehicle
Transport and storage in low temperature environments: Yes
Required maintenance cartridges: 1
Preparing for Transportation
1. Remove the paper. 1.
• Rolls •
Removing the Roll from the Printer
• Sheet •
Removing Sheets
2. If touch screen indicates to replace maintenance cartridge, replace maintenance 2.
cartridge.
Replacing the Maintenance Cartridge
346