manualshive.com logo in svg

Canon FY8-13HW-000, Service Manual

Share
Download
Canon FY8-13HW-000 Service Manual Download Page 44

COPYRIGHT © 2002 CANON INC. 

2000 2000 2000 2000

 NM-PDL REV.0 JULY 2002

CHAPTER 4 SERVICE PROCEDURE

4-1

1 Before Disassembling the Unit

Generally, the iR-M2 requires no regular service or maintenance. Use the procedures in

this chapter to inspect, remove, reseat, and replace major hardware components, as well as
to install system software.

1.1 Overview

This chapter includes information on servicing the following components:
• Boards and Cables
• Motherboard components (DIMM, CPU, battery)
• Fans (front and back panel)
• Power supply
• HDD (hard disk drive)
• CD-ROM drive
• Front panel components

See F04-102-01 on page 4-2 for an overview of components. Replacement parts are avail-

able from your authorized service representative. The terms “replace” and “replacing” are
typically used throughout this chapter to mean reinstallation of existing components. Install
new components only when necessary. If you determine that a component you have re-
moved is not faulty, make sure to reinstall it back in the system.

When performing the service procedures described in this chapter, follow
the precautions listed in “Precautions” on page xiii.

Memo

The tools required to service the system are listed in “Appendix” on page
A-2.

1.2 System software

System software is installed on the HDD at the factory. System software is also provided

on a CD containing system software and fonts. Use the System Software CD when:

• You upgrade to a more recent version of the system software
• You replace the HDD
If you change language, perform the “Factory Default” in set up menu.

Memo

System software installation takes approximately 20 minutes.

For information on how to install system software, see “System software service” on page

4-54.

Chapter_04.p65

02/07/25, 11:28

1

Summary of Contents for FY8-13HW-000














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands