COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
CHAPTER 3 CONNECTING THE iR-M2
3-15
3 Shutting down and restarting
The iR-M2 will probably be left on all the time at the customer site. Remember that when
the iR-M2 is powered off, network access to the copier is interrupted.
You should shut down the iR-M2 when you need to service it or the copier, and before
you remove or attach any cables to the iR-M2. Shut down the iR-M2 before changing the
copier’s toner cartridge in order to prevent the fan from drawing toner into the iR-M2.
3.1 TO SHUT DOWN THE iR-M2
Always verify that the iR-M2 is not being used before you begin the fol-
lowing procedure to power off the iR-M2.
1. Make sure that the iR-M2 Info screen reads Idle.
When Printing or Ripping appears on the Control Panel, the iR-M2 is currently process-
ing a job. Idle appears in the Info screen when the iR-M2 is finished processing the job.
2. At the Idle screen, press the Menu button once to display the Functions menu.
3. Scroll to select Shut Down from the Functions menu.
4. At the next screen, select Shut Down System.
The message It is now safe to power off the system.... is displayed.
5. Power off the iR-M2 using the power switch on the back panel (press 0).
Use the line selection button to
the right to select Shut down.
Chapter_03.p65
02/07/23, 13:20
15
