COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
CHAPTER 2 PREPARING FOR INSTALLATION
2-5
2.6 Setting customer expectations
If the site is ready, installation takes about one hour. The customer should be informed of
the following:
• Some nodes on the network may be unavailable for up to one hour.
• The copier may be unavailable for up to one hour.
• The network administrator needs to be available during the installation for network
connectivity.
Equipment downtime and impact on the network can be minimized if the network ad-
ministrator installs a network connector for the iR-M2 and confirms network func-
tionality with the connector in place before the date scheduled for the iR-M2 installa-
tion.
• The network administrator should have a networked computer available during the
installation. The appropriate software should already be installed. Documentation for
the networked computer and the network operating software should be available.
• The network administrator should install the user software shipped with the iR-M2
(user documentation is also included) onto networked PC and Mac OS computers that
will print to the iR-M2.
Memo
This guide covers hardware installation and service. It provides general in-
formation on connecting the iR-M2 to the customer’s network. Network
setup and configuration information goes beyond the scope of this guide.
For network setup and configuration information, refer the network admin-
istrator to the Configuration Guide.
Chapter_02.P65
02/07/25, 11:50
5
