background image

Additional Information 

Š

 121

Optional Accessories

Call or visit your local retailer/dealer for genuine Canon video acces-
sories. You can also obtain genuine accessories for your Canon cam-
corder by calling: 1-800-828-4040, Canon U.S.A. Information Center.

1

 Battery Pack

When you need extra battery packs, 
make sure you select the BP-808.

When you use battery packs bear-
ing the Intelligent System mark, the 
camcorder will communicate with the battery and display the remaining 
usage time (accurate to 1 minute). You can only use and charge these 
battery packs with camcorders and chargers compatible with Intelligent 
System.

2

 CG-800 Battery Charger

Use the battery charger to charge 
the battery packs. It plugs directly 
into a power outlet without a cable.

Use of genuine Canon accessories is recommended.

This product is designed to achieve excellent performance when used 
with genuine Canon accessories. Canon shall not be liable for any 
damage to this product and/or accidents such as fire, etc., caused by 
the malfunction of non-genuine Canon accessories (e.g., a leakage 
and/or explosion of a battery pack). Please note that this warranty does 
not apply to repairs arising out of the malfunction of non-genuine 
Canon accessories, although you may request such repairs on a 
chargeable basis.

Summary of Contents for FS40
































































































































































































Reviews: