Additional Information
102
Cleaning
Camcorder Body
• Use a soft, dry cloth to clean the
camcorder body. Never use
chemically treated cloths or volatile
solvents such as paint thinner.
Lens
If the lens surface is dirty, the autofocus
may not work properly.
• Remove any dust or dirt particles
using a non-aerosol type blower
brush.
• Use a clean, soft lens-cleaning cloth
to gently wipe the lens. Never use
tissue paper.
LCD Screen
• Clean the LCD screen using a clean,
soft lens-cleaning cloth.
• Condensation may form on the
surface of the screen when the
temperature changes suddenly. Wipe
it with a soft dry cloth.
Condensation
Moving the camcorder rapidly between
hot and cold temperatures may cause
condensation (water droplets) to form
on its internal surfaces. Stop using the
camcorder if condensation is detected.
Continued use may damage the
camcorder.
Condensation may form in the following cases:
• When the camcorder is moved
quickly from cold to warm places
• When the camcorder is left in a humid
room
• When a cold room is heated rapidly
• Do not expose the camcorder to
sudden or extreme changes in
temperature.
• Place the camcorder in an airtight
plastic bag and let it adjust to
temperature changes slowly before
removing it from the bag.
The camcorder automatically shuts off.
The precise time required for water
droplets to evaporate will vary
depending on the location and weather
conditions. As a general rule, wait for 2
hours before resuming use of the
camcorder.
Using the Camcorder Abroad
Power So
u
rce
s
You can use the compact power
adapter to operate the camcorder and
to charge battery packs in any country
with power supply between 100 and
240 V AC, 50/60 Hz. Consult a Canon
Service Center for information on plug
adapters for overseas use.
Maintenance/Others
T
O
AVOID
CONDENSATION
W
HEN
CONDENSATION
IS
DETECTED