Canon Finisher-T1, Service Manual

Page: 63 / 174

Chapter 3
3-1
3.1 External Covers
3.1.1 Rear Upper Cover
3.1.1.1 Removing the Rear
Upper Cover
0009-4228
1) Remove four screws [1] and remove the rear upper
cover [2].
F-3-1
3.1.2 Grate-shaped Upper Guide
3.1.2.1 Removing the Front
Door
0009-4489
1) Open the front door [1] and remove the clip [2].
2) Lift the front door [1] to remove.
F-3-2
3.1.2.2 Removing the Escape
Tray Cover
0009-4406
1) Remove four screws [1], open the escape door [2],
and then remove the escape tray cover [3].
F-3-3
3.1.2.3 Removing the Grate-
shaped Upper Guide
0009-3571
1) Lower tray [1] below the grate-shaped upper guide
[2] (For how the tray is moved, see the steps under
"Removing the Tray 1.").
2) Remove five screws [3] and remove the grate-
shaped upper guide [2].
[2]
[1]
[1]
[2]
[2]
[1]
[3]
[1]