Canon Finisher-Q1, Service Manual

Page: 62 / 64

Chapter 5
5-4
5.4 Alam Code
5.4.1 Punch Waste Case Full
0008-2059
T-5-3
5.4.2
Punch Waste Case Overflow
0008-2061
T-5-4
Fault Description Timing of detection Resetting
The punch waste
case is full. -With the punch
waste sensor on, an
attempt is made at
punching. at time of a punching
session Remove the
punch waste
from the case
found in the
compartment.
Fault Description Timing of detection Resetting
The punch waste
case has started to
overflow. After a punch
waste case full
condition has
been detected,
the sensor has
gone on as long
as 300
punching
operations are
executed.
-The punch
waste sensor is
on at the rising
edge of the 24-
V power
system. (The
machine will
assume that the
waste case is
missing.) at time of a punching
session Remove the
punch waste
from the
waste case in
the
compartment.