Canon Finisher-Q1, Service Manual

Page: 61 / 64

Chapter 5
5-3
5.3 Jam Codes
5.3.1 Detecting a Jam
0008-2385
The machine will assume any of the following conditions to indicate the presence of a jam, and communicates the
fact to its host machine. In response, the host machine will stop copying operation and, at the same time, indicate the
presence of a jam on its control panel.
T-5-2
Jam type Description Code
Punching jam In the course of a punching session, a move from
home position to non-home position does not occur
within 200 msec. Or, an over-run condition occurs,
causing a non-home position state.
1644
Punch power-on jam At time of power-on, the punch inlet path sensor
detects the presence of paper.
1347