Canon Finisher-Q1, Service Manual

Page: 37 / 64

Chapter 3
3-3
3.2 Drive System
3.2.1 Punch Motor
3.2.1.1 Removing the Upper
Cover
0008-1888
1) Remove the screw [1] at the front.
F-3-7
2) Remove the two screws [1] at the back to detach the
upper cover [2].
F-3-8
3.2.1.2 Removing the Punch
Motor
0008-1900
3) Remove the screw [1] to slide the plate [2] to the
left.
F-3-9
4) Flip up the Mylar [1] and disconnect the connector
[2].
F-3-10
5) Remove the screw [1] to remove the sensor mount
[2].
F-3-11
6) Remove the E-ring [1] to detach the pulley [2] and
gear [3].
7) Remove the E-ring [4] to detach the gear [5].
[1]
[1]
[2]
[1] [2]
[1]
[2]
[1]
[2]