Canon FAX-L280, User Manual, Page: 98 / 212

¶ If you selected 131P in step 8:
9
Press
Set
twice.
10
Use the numeric buttons to enter
the ID code (max. 20 digits, no
pauses necessary).
❏
This ID code is given to you
by Cable and Wireless
Communications Limited (or
another alternative service).
❏
If an ID code is already
registered, you will see a string
of asterisks (
@
.
@
.
@
.
@
.
@
.
) on the display.
11
Press Set .
12
Press Stop to return to standby
mode.
Sending With an Alternative Telephone Network
Follow this procedure to send using a registered long distance service:
1
Load the document, face down in
the ADF (
→
p. 4-3).
❏
To adjust the resolution and
contrast, see pp. 7-2, 7-3.
❏
You may be unable to send if
the memory used (shown in
the LCD) is close to
100%
. Use
manual sending via the handset
instead (
→
p. 7-6).
2
Open the one-touch speed dial panel.
3
Press
M
.
4
Use the numeric buttons to dial the
other party’s fax number.
❏
If you enter the wrong number,
press Stop , then start again from
step 3.
ID CODE
Ex:
123456789
Ex:
REPORT SETTINGS
15:00
Ex:
FaxOnly
DOCUMENT READY
MEMORY USED 0%
(Currently used memory)
(Standby to scan)
Ex:
TEL= M
TEL=M416795111
Ex:
7-20
Sending Faxes Chapter 7