Canon Fax-L260i User Manual Download Page 208

Page: 208 / 262

Canon

FAX-L260i

User’s Guide

ENGLISH

9-32

Chapter 9

Frequently Asked Questions

Message

Error Code

Cause

Action

CHECK COVER/CART

–

The toner cartridge is not
installed properly.

Make sure the toner cartridge
is installed properly.

The front cover is open.

Close the front cover.

CHECK DOCUMENT

#001

A document is jammed in
the Automatic Document
Feeder (ADF).

Remove the document you are
trying to send or copy and load
it again.

#011

The fax tried to poll
another unit but the other
fax unit did not have a
document to send.

Contact the other party and
have them set the documents
for polling.

CHECK PAPER SIZE

–

The size of the paper in
the sheet feeder differs
from that specified in the
FAX PRINTER menu
setting.

Set the correct paper size in
the FAX PRINTER menu
setting.

CHECK PRINTER

–

The toner cartridge in the
FAX-L260i is defective.

Reinstall the cartridge.

Unplug the FAX-L260i,
wait five seconds, then
plug it in again. If the
display does not change,
call for service.

The unit is connected to an
uninterruptible power
supply (UPS).

Make sure the power cord is
plugged into an AC outlet.

CHECK SUB/PWD

#083/102

You cannot poll the other
party to receive a
document because a
subaddress and/or
password does not match.

Call the other party and
confirm that the subaddress
and/or password that you are
using are correct.

You cannot send
documents because the
subaddress and/or
password are rejected by
the other party’s fax
machine.

Call the other party and
confirm that the subaddress
and/or password that you are
using are correct.

CLEAR PAPER JAM

#009

The FAX-L260i has no
paper in its sheet feeder, or
has a paper jam.

Add paper or clear the jam. If
a document was received in
memory, the fax prints the
received documents from
memory.

Summary of Contents for Fax-L260i







































































































































































































































































Search results

Summary of Contents for Fax-L260i

Reviews:

Related manuals for Fax-L260i

Brands by name

Popular brands

Canon Fax-L260i, User Manual

Search results

Summary of Contents for Fax-L260i

Reviews:

Related manuals for Fax-L260i

Brands by name

Popular brands