manualshive.com logo in svg

Canon FAX L200, User Manual

Share
Download
Canon FAX L200 User Manual Download Page 177

Chapter 13

Troubleshooting

13-21

T

roubleshooting

If You Cannot Solve a Problem

If you cannot solve the problem after having referred to the information in this chapter,
contact your local authorised Canon dealer or the Canon help line.

Canon’s support personnel are trained in the technical support of Canon’s products and
will able to help you with your problem.

n

Attempting to repair the FAX yourself may void the limited warranty.

c

If the FAX makes strange noises, emits smoke or strange smells, unplug it
immediately and contact your local authorised Canon dealer or the Canon help line.
Do not attempt to disassemble or repair the unit yourself.

If you need to contact Canon directly, make sure you have the following information:

• Product name

FAX-L200 or FAX-L280

• Serial number

The serial number is on the label located at the back of the unit.

• Place of purchase

• Nature of problem

• Steps you have taken to solve the problem and the results

Summary of Contents for FAX L200





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands