Canon FAX L200 User Manual Download

Page: 174 / 212

13-18

Troubleshooting

Chapter 13

Telephone Problems

■

Cannot dial.

The telephone line cord may not be connected properly.

• Make sure it is connected properly (

p. 2-6).

The power cord may not be plugged in securely.

• Check that the power cord is plugged securely into the FAX and into the wall outlet

(

p. 2-8). If the unit is plugged into a power strip, make sure the power strip is

plugged in and turned on.

The FAX may not be set for the correct telephone line type.

• Make sure the FAX is set for the correct telephone line type (

p. 3-8).

■

Optional handset or telephone disconnects while you are
talking.

The power cord may not be plugged in securely.

• Check that the power cord is plugged securely into the FAX and into the wall outlet

(

p. 2-8). If the unit is plugged into a power strip, make sure the power strip is

plugged in and turned on.

The optional handset or telephone cord may be defective.

• Check the cord by substituting with another cord.

Printing Problems

■

Alarm light is lit and the FAX beeps while printing.

The FAX may have a paper jam.

• Clear the paper jam (

p. 13-3).

• If the FAX has no paper jam, unplug the unit and wait five seconds, then plug it back

in. If the Alarm light remains lit, contact your local authorised Canon dealer or the
Canon help line.

■

Nothing prints.

The power cord may not be plugged in securely.

• Check that the power cord is plugged securely into the FAX and into the wall outlet

(

p. 2-8). If the unit is plugged into a power strip, make sure the power strip is

plugged in and turned on.

Summary of Contents for FAX L200





















































































































































































































Search results

Summary of Contents for FAX L200

Reviews:

Related manuals for FAX L200

Brands by name

Popular brands

Canon FAX L200, User Manual

Search results

Summary of Contents for FAX L200

Reviews:

Related manuals for FAX L200

Brands by name

Popular brands