manualshive.com logo in svg

Canon FAX L200, User Manual

Share
Download
Canon FAX L200 User Manual Download Page 153

Chapter 12

Maintenance

12-7

Maintenance

Replacing the Toner Cartridge

The only component of your FAX you will need to replace is the FX-3 toner cartridge.
Although Canon manufactures many different toner cartridges, the FX-3 toner cartridge
is the only one designed for use with your FAX. To purchase this toner cartridge,
contact your local authorised Canon dealer or the Canon help line.

When 

CHANGE CARTRIDGE

appears in the LCD, you may need to replace the toner

cartridge. However, it may also indicate that the toner inside the toner cartridge is
simply unevenly distributed. Before replacing the toner cartridge, follow this procedure
to distribute the toner evenly:

1

Remove the toner cartridge from the
FAX (

1

steps 1 to 4, below).

2

Gently rock the toner cartridge from 
side to side a few times to distribute
the toner evenly inside it.

• Poor print quality may result if the toner

is unequally distributed.

3

Reinsert the toner cartridge into the
FAX (

1

steps 8 and 9, p. 12-9).

If after following the procedure above, 

CHANGE CARTRIDGE

remains in the LCD or

print quality does not improve, follow this procedure to replace the toner cartridge:

1

Remove any documents and printouts from the FAX.

2

Make sure the FAX is plugged in.

3

Lift the latch and open the front cover.

c

Do not open the front cover
without lifting the latch since this
may damage your unit.

Summary of Contents for FAX L200





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands