Canon EOS RP Instruction Manual Download Page 251

Page: 251 / 841

Inserting/Removing the Battery and Card

You cannot use batteries other than the Battery Pack LP-E17.

After opening the card slot/battery compartment cover, be careful not to swing

it back any further. Otherwise, the hinge may break.

Removal

(1)

Open the card slot/battery

compartment cover.

Set the power switch to <

Check that the access lamp (1) is off,

then open the cover.

[Saving...]

is displayed on the screen,

close the cover.

Remove the battery.

Press the battery lock lever as shown by

the arrow and remove the battery.

To prevent short-circuits, always attach

the included protective cover (

40)

to the battery.

Remove the card.

Gently push in the card, then let it go to

eject.

Pull the card straight out.

Close the cover.

Press the cover until it snaps shut.

Summary of Contents for EOS RP










































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS RP

Reviews:

Brands by name

Popular brands

Canon EOS RP, Instruction Manual

Search results

Summary of Contents for EOS RP

Reviews:

Brands by name

Popular brands