Canon EOS RP Page 458 Instruction Manual Download

Page: 458 / 841

250

Setting the Movie Recording Size

If you change the

[

: Video system]

setting, also set

[

: Movie rec. size]

again.

Normal playback of 4K and

movies may not be possible on

other devices, because playback is processing-intensive.

Clarity and noise vary slightly depending on movie recording size, cropped

shooting settings, and the lens used.

Movies cannot be recorded in VGA quality.

4K Movie Recording

Recording 4K movies requires a high-performance card. For details, see

“Cards that Can Record Movies” on

585.

Recording 4K movies greatly increases the processing load, which may

cause the camera’s internal temperature to increase faster or become

higher than for regular movies.

If a red

icon appears during movie

recording, the card may be hot, so stop recording the movie and let

the camera cool down before removing the card. (Do not remove the

card immediately.)

From a 4K movie, you can select any frame to save as an approx.

8.3-megapixel (3840×2160) JPEG still image to the card (

306).

Contrast detection is used to focus when recording 4K movies. Focusing may

take longer than when recording HD or Full HD movies.

Summary of Contents for EOS RP










































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS RP

Reviews:

Related manuals for EOS RP

Brands by name

Popular brands

Canon EOS RP, Instruction Manual

Search results

Summary of Contents for EOS RP

Reviews:

Related manuals for EOS RP

Brands by name

Popular brands