Canon EOS M5 Page 93 User Manual Download

Page: 93 / 222

Advanced Guide

Basic Guide

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

Playback Mode

Wireless Features

Setting Menu

Accessories

Appendix

Index

P Mode

Tv, Av, M, C1, and C2 Mode

Before Use

Adjusting the Flash Output

Still Images

Movies

Choose from the three flash levels in [

][

][ ] modes.

Set the flash mode to [Manual flash].

●

Press the [

] button and choose

[Flash Control] on the [ 5] tab. In

[Built-in flash settings], set [Flash Mode]

to [Manual flash] (

35).

Configure the setting.

●

Raise the flash, press the [

] button and

immediately turn the [

] dial to choose

the flash level, and then press the [

]

button.

●

Once the setting is complete, the flash

output level is displayed.

[

]: Minimum, [

]: Medium,

[

]: Maximum

●

You can also set the flash level by accessing MENU (

35)

and choosing [

5] tab > [Flash Control] > [Built-in flash settings]

> [

flash output].

●

You can also access the [Flash Control] screen (

35) as

follows.

Press and hold the [ ] button for at least one second.

When the flash is up, press the [

] button and immediately

press the [

] button.

●

You can also access the [Flash Control] screen (

35) by

pressing the [ ] button and touching [

Shooting Long Exposures (Bulb)

With bulb exposures, shots are exposed for as long as you hold down the

shutter button.

Specify bulb exposure.

●

Set the shutter speed to [BULB],

following steps 1 – 2 in “Specific Shutter

Speeds and Aperture Values ([M] Mode)”

(

92).

Shoot.

●

Shots are exposed for as long as you

hold the shutter button all the way down.

The elapsed exposure time is displayed

during exposure.

●

Mount the camera on a tripod or take other measures to keep it
still and prevent camera shake. In this case, also disable image
stabilization (

86).

●

Images from bulb exposures may have more noise and look
grainy. Noise can be reduced by setting [Long exp. noise
reduction] to [AUTO] or [ON] (

89).

●

You can also use a Remote Controller (sold separately) for bulb
exposures (

171).

●

When [Touch Shutter] is set to [Enable], shooting is started by
touching the screen once and stopped by touching it again. Be
careful not to move the camera when touching the screen.

Summary of Contents for EOS M5































































































































































































































Search results

Summary of Contents for EOS M5

Reviews:

Related manuals for EOS M5

Brands by name

Popular brands

Canon EOS M5, User Manual

Search results

Summary of Contents for EOS M5

Reviews:

Related manuals for EOS M5

Brands by name

Popular brands