Canon EOS M5 Page 55 User Manual Download

Page: 55 / 222

Advanced Guide

Basic Guide

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

Playback Mode

Wireless Features

Setting Menu

Accessories

Appendix

Index

P Mode

Tv, Av, M, C1, and C2 Mode

Before Use

Viewing Settings

●

To check the settings of images you view

that were captured in [ ] mode, press

the [

] button. The screen at left is

displayed.

Creative Zone Settings Corresponding to Creative

Assist Mode Settings

[ ] Mode Setting

Creative Zone Setting

(A) Background

(a) Aperture value (

91)

(B) Brightness

(b) Exposure compensation (

69)

However, in flash shots, corresponds to (b’), flash

exposure compensation (

83)

73)

(D) Contrast

(d) Picture Style contrast (

76)

(E) Saturation

(e) Picture Style saturation (

76)

(F) Monochrome

(f) Picture Style

filter and toning effect

(

76)

Loading Settings

●

Follow step 1 in “Shooting with Your

Favorite Settings (Creative Assist)”

(

53) and choose [ ].

●

Press the [ ] button, press the [ ][ ]

buttons to choose [ ], and then choose

a profile to load, either by pressing the

[ ][ ] buttons or turning the [ ][

]

dials.

●

Press the [ ] button to apply the saved

settings.

●

To return without applying settings,

choose [–] and press the [ ] button.

Using Settings from Images

Load settings from images captured in [ ] mode to use them when

shooting.

●

Follow step 1 in “Shooting with Your

Favorite Settings (Creative Assist)”

(

53) and choose [ ].

●

Press the [

] button to enter Playback

mode, and then choose an image

captured in [ ] mode to display it.

●

Press the [ ] button, choose [ ] in the

menu, and press the [ ] button again.

●

The settings are applied, and the camera

enters Shooting mode.

●

Settings cannot be applied when the mode dial is set to a mode
other than [

]. A message is displayed if this is attempted, and

the camera remains in Playback mode. To apply settings, set the
mode dial to [

●

[ ] is not displayed for images shot in modes other than [

]

mode.

Summary of Contents for EOS M5































































































































































































































Search results

Summary of Contents for EOS M5

Reviews:

Related manuals for EOS M5

Brands by name

Popular brands

Canon EOS M5, User Manual

Search results

Summary of Contents for EOS M5

Reviews:

Related manuals for EOS M5

Brands by name

Popular brands