Canon EOS M5 Page 171 User Manual Download

Page: 171 / 222

171

Advanced Guide

Basic Guide

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

Playback Mode

Wireless Features

Setting Menu

Accessories

Appendix

Index

P Mode

Tv, Av, M, C1, and C2 Mode

Before Use

Using a Remote Switch (Sold Separately)

An optional Remote Switch RS-60E3 can be used to avoid camera shake

that may otherwise occur when pressing the shutter button directly. This

optional accessory is convenient when shooting at slow shutter speeds.

Connect the remote switch.

●

Make sure the camera is off.

●

Open the terminal cover and insert the

remote switch plug.

Shoot.

●

Turn the camera on.

●

To shoot, press the release button on the

remote switch.

Using the Hot Shoe

Use the hot shoe to attach an optional external flash or microphone.

Remove the hot shoe cap.

●

Pull off the cap as shown.

●

To avoid losing the cap, place it in

the case for your external flash or

microphone.

Attach the hot shoe cap.

●

After removing the external flash or

microphone, reattach the cap to protect

the hot shoe.

●

Insert the cap as shown.

(1)

(2)

●

Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.

●

Do not attach the adapter or adapter cord to other objects. Doing
so could result in malfunction or damage to the product.

Shooting Remotely

Use Remote Controller RC-6 (sold separately) to shoot from up to approx.

5 meters (16.4 ft.) in front of the camera.

●

Follow step 1 in “Using the Self-Timer”

(

44) and choose [ ].

●

Aim the Remote Controller at the

camera’s remote control sensor and

press the transmit button to shoot.

●

The camera does not shoot unless subjects are in focus.

●

Shutter release may be triggered accidentally by any fluorescent

or LED lighting nearby. Use the camera as far away from these
light sources as possible.

●

Operating a TV remote control or similar device aimed at the
camera may trigger accidental shutter release.

Summary of Contents for EOS M5































































































































































































































Search results

Summary of Contents for EOS M5

Reviews:

Related manuals for EOS M5

Brands by name

Popular brands

Canon EOS M5, User Manual

Search results

Summary of Contents for EOS M5

Reviews:

Related manuals for EOS M5

Brands by name

Popular brands