Canon EOS C300 Instruction Manual Download Page 163

Page: 163 / 202

163

Menu Options

[ND Filter]:

Displays the ND filter indicator when set to [On].

[AF Mode]:

When set to [On], displays the autofocus icon (AF) if the focus mode switch on the attached

EF lens is set to AF.

[Key Lock]:

Displays the key lock icon (

) when set to [On].

[White Balance]:

Displays the white balance indicator when set to [On].

[Exposure]:

Displays the exposure bar when set to [On].

[Iris]:

Displays the aperture setting when set to [On].

[ISO/Gain]:

Displays the ISO speed or gain setting when set to [On].

[Shutter]:

Displays the shutter speed setting when set to [On].

[Peaking]:

Displays the peaking icon (

) when set to [On].

[Magnification]:

Displays the screen magnification icon (

) when set to [On], indicating that the image on

the screen is being magnified.

[View Assist.]:

Displays the view assistance icon (

) when set to [On].

[Lens]:

Displays the lens warning icon (

) when set to [On].

[Custom Display 2] settings

[Remaining Battery]:

Controls when the remaining battery indicator appears.

[Normal]: Always appears on the screen.

[Warning]: Appears only when there is a warning.

[Remaining Rec Time]:

Displays the remaining recording time.

[Normal]: Always appears on the screen.

[Warning]: Appears only when there is a warning.

[Rec Mode]:

Displays the recording operation indicator ([STBY] in record pause mode, for example) when set

to [On].

[Genlock]:

Displays the Genlock synchronization icon (

) when set to [On].

[Time Code]:

Displays the time code when set to [On].

[Interval Counter]:

Displays the countdown during interval recording mode when set to [On].

[SD Card Status]:

Controls when the SD card status indicator appears.

[Normal]: Always appears on the screen.

[Warning]: Appears only when there is a warning.

[Bit rate/Resolution]:

Displays the bit rate and resolution when set to [On].

[Frame Rate]:

Displays the frame rate when set to [On].

[Character Rec]:

Displays the character recording warning icon (

) when set to [On], indicating that the

onscreen displays will be recorded on the clip.

[Output Display]:

Displays the output display warning icon (

) when set to [On], indicating that the

onscreen displays will be output to an external monitor.

[SDI Rec Command]:

Displays the status of the SDI recording command that is being output when

[

Other Functions]

[SDI Rec Command] is set to [On].

[User Memo]:

Displays the user memo icon (

) when set to [On], indicating that a user memo will be

recorded with a clip.

[User Bit]:

Displays the user bit when set to [On].

[Audio Output CH]:

Displays the audio output channel when set to [On].

[Audio Level]:

Displays the audio level indicator and, if activated, the audio peak limiter icon (

) when set to [On].

[Wi-Fi]:

Displays the Wi-Fi icon (

) when set to [On].

COP

Summary of Contents for EOS C300











































































































































































































Search results

Summary of Contents for EOS C300

Reviews:

Brands by name

Popular brands

Canon EOS C300, Instruction Manual

Search results

Summary of Contents for EOS C300

Reviews:

Brands by name

Popular brands