Canon EOS C100, Instruction Manual

Page: 149 / 166

149
Troubleshooting
Memory card cover is open
- The SD card compartment cover was open when the camcorder was switched to or turned on in mode. Close
the compartment cover.
No clips
- There are no clips on the SD card to play back. Clips must be recorded (
A
45) in order to play them back.
No photos
- There are no photos on the SD card to play back. Photos must be taken (
A
121) in order to view them.
Pre Rec was canceled. Activate Pre Rec again?
- Pre-recording was deactivated automatically after the camcorder was left in record pause mode for about 1 hour with
pre-recording activated. Select [On] and then press the joystick to activate pre-recording again.
Pre Rec will be canceled in a moment.
- The camcorder has been in record pause mode for about 1 hour with pre-recording activated. Pre-recording will be
deactivated automatically in approximately 1 minute.
Recorded at 50.00 Hz/59.94 Hz Check the data on
*
A/
*
B Initializing the card is also recommended
- The SD card contains clips that were recorded using a recording type (system frequency) other than the one currently
used by the camcorder. To record on this SD card, save your clips (
A
119) and initialize the SD card (
A
40). To play
back the recordings on the SD card, set [
w
Other Functions]
>
[System Frequency] to [59.94 Hz] or [50.00 Hz] as
necessary, so the camcorder matches the SD card.
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or edited on a computer.
*
A/
*
B Buffer overflow. Recording was stopped.
- The data transfer rate was too high for the SD card in use and the recording was stopped. Use a recommended card
(
A
38).
*
A/
*
B Cannot record movies on this memory card
- Video cannot be recorded on a 64 MB or smaller SD card. Use a recommended card (
A
38).
*
A/
*
B Cannot restore
- Could not recover data on the SD card. Save your clips (
A
119) and initialize the SD card (
A
40).
*
A/
*
B Cannot start continuous rec
- You have already recorded the maximum number of continuous recording clips (200 clips) in a single SD card. Replace
the SD card(s).
*
A/
*
B May not be possible to record movies on this memory card
- You may not be able to record video on an SD card without a speed class rating or rated SD Speed Class 2. Replace
the SD card with one rated SD speed class 4, 6 or 10.
*
A/
*
B Media full
- SD card A or SD card B is full so recording will not start. Switch to the SD card in the other SD card slot to record.
*
A/
*
B Memory card is write-protected
- The LOCK switch on the SD card is set to prevent accidental erasure. Change the position of the LOCK switch.
*
A/
*
B Number of clips already at maximum
- The SD card selected for recording already contains the maximum number of clips (3,999 clips). Replace the SD card
or use the SD card in the other SD card slot.
- Because both SD cards reached the maximum number of clips, double slot recording is not available.
• During double slot recording, both “
*
A” and “
*
B” will appear in the message.
*
A/
*
B Number of shots already at maximum
- You have already recorded the maximum number of shots (3,999 shots) in a single SD card. When using two SD cards,
you cannot record additional shots on either SD card. To add more shots, replace the SD card(s).
*
A/
*
B Number of shots in this clip already at maximum
- You have already recorded the maximum number of shots (950 shots) in a single continuous recording clip.
Continuous recording can continue but you cannot record additional shots. To add more shots, stop the continuous
recording to record a clip and then start recording a new continuous recording clip (
A
85).
*
A/
*
B Reached the recording limit for one clip. Recording was stopped.
- When recording a single clip for an extended period of time, the clip will be split into smaller video files every 2 GB.
This message will appear when the number of smaller video files reaches 50.
COP
Y