Canon EOS 7D Mark II (G) Page 81 Basic Instruction Manual Download

Page: 81 / 180

Selecting the AF Area and AF Point

You can manually select the AF point or zone.

Press the <

> button.

The AF points will be displayed in the
viewfinder.

In AF point expansion modes,
adjacent AF points will also be
displayed.

In the Zone AF mode, the selected
zone will be displayed.

Select an AF point.

The AF point selection will change in
the direction you tilt <

>. If you

press <

> straight down, the center

AF point (or center zone) will be
selected.

You can also select a horizontal AF
point by turning the <

> dial and

select a vertical AF point by turning
the <

> dial.

In the Zone AF mode, turning the
<

> or <

> dial will change the

zone in a looping sequence.

Selecting the AF Point Manually

Summary of Contents for EOS 7D Mark II (G)





















































































































































































Search results

Summary of Contents for EOS 7D Mark II (G)

Reviews:

Related manuals for EOS 7D Mark II (G)

Brands by name

Popular brands

Canon EOS 7D Mark II (G), Basic Instruction Manual

Search results

Summary of Contents for EOS 7D Mark II (G)

Reviews:

Related manuals for EOS 7D Mark II (G)

Brands by name

Popular brands