125
In the <
d
> <
s
> <
f
> <
a
> <
F
>
modes, just press the <
D
> button to raise
the built-in flash for flash photography.
Before shooting, check that [
D
] is displayed
in the viewfinder. After shooting, push the
built-in flash back down with your fingers
until it clicks into place.
In the <
A
> mode, the built-in flash will be raised and fire automatically
in low-light or backlit conditions. You can also enable or disable the
flash firing.
The table below shows the shutter speed and aperture settings that will
be used with flash.
D
Using the Built-in Flash
Shooting Mode
Shutter Speed
Aperture
A
Automatically set
Automatically set
d
Automatically set
(1/250 sec. - 1/60 sec.)
Automatically set
s
Manually set (1/250 sec. - 30 sec.)
Automatically set
f
Automatically set
(1/250 sec. - 30 sec.)
Manually set
a
Manually set (1/250 sec. - 30 sec.)
Manually set
F
Exposure continues while you hold
down the shutter button or while
the bulb timer is operating.
Manually set
Summary of Contents for EOS 7D Mark II (G)
Page 179: ......
