background image

30

1

Remove the protective cover.

 

Detach the protective cover provided 
with the battery.

2

Attach the battery.

 

As shown in the illustration, attach the 
battery securely to the charger.

 

To detach the battery, follow the 
above procedure in reverse.

3

Recharge the battery.
For LC-E6

 

As shown by the arrow, flip out the 
battery charger’s prongs and insert 
the prongs into a power outlet.

For LC-E6E

 

Connect the power cord to the 
charger and insert the plug into a 
power outlet. 

X

Recharging starts automatically and 
the charge lamp blinks in orange.

 

It takes approx. 2 hr. and 30 min. to fully recharge a completely exhausted battery at 
room temperature (23°C / 73°F). 

The time required to recharge the battery will vary 

greatly depending on the ambient temperature and the battery’s remaining capacity.

 

For safety reasons, recharging in low temperatures (5°C - 10°C / 
41°F - 50°F) will take longer (up to approx. 4 hr.).

Charging the Battery

LC-E6

LC-E6E

Charge Level

Charge Lamp

Color

Display

0-49%

Orange

Blinks once per second

50-74%

Blinks twice per second

75% or higher

Blinks three times per second

Fully charged

Green

Lights up

Summary of Contents for EOS 7D Mark II (G)





















































































































































































Reviews: