Canon EOS 5D Mark II - EOS 5D Mark II 21.1MP Full Frame CMOS Digital SLR Camera, Service Manual

Page: 140 / 285

Adjustments
7
2.2 Finder Focus Adjustment
・ Be sure to perform the Finder Focus Adjustment after the FFD Adjustment
is completed.
CAUTION
<Purpose>
To fit the position of CMOS sensor plane and the viewfinder focus point.
<Specifications>
The center of the infinity mark must be positioned within 1.5 index line widths of the index
line as shown below.
<Tools>
・Magnifier AD-S
・Lens with focusing scale. Lens of 100mm focal length or less is desirable.
・General purpose 500mm collimator
<Preparation>
1） Without the lens attached to the camera, turn the diopter adjustment dial of the camera to
adjust the AF frame to be at the center of the viewfinder.
2） Attach the magnifier to the camera eyepiece and adjust the diopter of the magnifier.
(Perform without the lens attached.)
<Adjustment Procedure>
1） Look through an object that is located at least 250m away (such as lightening rod or
chimney) and turn the manual ring to find the position that gives the clearest view of the
object.
2） Check if the center of the infinity mark is positioned within 1.5 index line equivalent
widths. If not, replace the focus washer and try again.
＊ When a collimator is used, select the focus washer that gives the clearest view of the collimator scale.
Fig. 009 Lens Focusing Scale Window
Fig. 010 Focus Washer Replacement