Canon EOS 5D Mark II - EOS 5D Mark II 21.1MP Full Frame CMOS Digital SLR Camera, Service Manual

Page: 55 / 285

General Information
50
9. OPERATION CAUTIONS
Cautions Remarks
[Imaging sensor]
1. When cleaning the CMOS sensor, use only a
hand blower to blow off dust, etc. Never touch
the CMOS surface with any brush, cloth, or
cleaning agent. Also do not use pressurized
(canned) air or gas to clean the CMOS sensor.
This is to prevent damage to the sensor
2. If there is a strong light source within
the image area, ghosting might occur at a
symmetrical position or near the light source.
As per the design of low-pass filter.
[Image Recording and Playback]
3. While the access lamp is blinking, do not
shake or subject the camera to any physical
shock and do not open the Compact Flash
card slot cover or remove the battery.
Doing so may damage the stored images,
Compact Flash card, or even the camera itself.
4. Do not leave or use the camera near a strong
magnetic field such as a television, audio
speaker, or magnet.
A magnetic or electromagnetic field can
adversely affect the image on the LCD monitor.
It may also prevent proper shooting and image
recording and damage images in the Compact
Flash card.
5. Do not leave or use the camera near an
electronic transmission tower, etc., which
emits a strong magnetic field.
The electric wave can adversely affect the image
on the LCD monitor. It may also prevent proper
shooting and image recording and damage
images in the Compact Flash card.
6. If a high ISO speed is set, fewer images can be
captured.
As per the design.
(The LCD panel will show the remaining shots
which varies depending on the ISO speed.)
7. When an image captured with Adobe RGB
is displayed on the LCD monitor or TV set,
displayed in an sRGB environment, or printed
by an sRGB printer, the image will have low
color saturation.
This occurs because the color space is not
suitable.
(Compared to sRGB, Adobe RGB's color
reproduction range is wider. If the image is
displayed via sRGB without profile conversion,
the color reproduction range becomes narrow.)
(To obtain accurate reproduction of Adobe RGB
in an sRGB environment, use image-editing
software like Adobe Photoshop to convert the
profile to sRGB.)
＊There is no problem printing with a CP printer
.