manualshive.com logo in svg

Canon EOS 1V, Service Manual

Share
Download
Canon EOS 1V Service Manual Download Page 20

4-3  Metering range: 

EV 0-20 in all metering modes (at 20°C with 50mm
f/1.4 lens, ISO 100)
Shutter speed or aperture display blinks at 2 Hz.

4-5  Exposure metering:  Activated when shutter button is pressed halfway.

* Before shutter release: Metering remains active for 6

sec. after the halfway-depressed shutter button is
released.

* After shutter release: Metering remains active for 2

sec. after the halfway-depressed shutter button is
released.

Automatically set with DX-coded film at ISO 25-5000
or settable manually at ISO 6-6400. Settable in 1/3-
stop increments.
* The manually set ISO film speed and exposure com-

pensation are displayed during film rewind and after
film rewind before the film cartridge is removed.

* With non-DX-coded film, the ISO speed set previous-

ly will blink to indicate that manual setting of ISO is
required.

(1) AEB: Autoexposure bracketing
* Set by pressing the Shooting mode selector and AF

mode button and turning Main Dial. Bracketing
amount: Up to ±3 stops in 1/3-stop increments

* The bracketing sequence is correct exposure, under-

exposure, and overexposure, taken according to the
film advance mode.

If the self-timer is used, the three bracketed shots
will be exposed successively after the self-timer
delay.

* AEB cancellation

AEB is canceled with any of the following: 0 brack-
eting amount, CLEAR, flash ready, bulb, main
switch set to L, lens interchange, film loading and
initial advance, or rewind.

* If the battery is replaced during AEB, AEB will start

from the first shot (correct exposure) again.

(2) Manual exposure compensation
* Turn Quick Control Dial or press exposure compen-

sation button and turn Main Dial. Set up to ±3 stops
in 1/3-stop increments.

(3) (1) and (2) above can be set in combination.

4-7  Exposure

Compensation:

4-6  ISO Film Speed

Range:

4-4  Unsuitable expo-

sure warning:

1-18

Part 1: General Information

Aperture

●

—
—

●

—

●

Shooting Mode

1 Shutter speed-priority AE
2 Aperture-priority AE
3 Depth-of-field AE
4 Program AE
5 Manual

Shutter speed

—

●
●
●
●

—

Bracketing Method

CF-5-0
CF-5-1

Bracketing method of each shooting mode

Summary of Contents for EOS 1V

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands