Canon EOS 1V Service Manual Download Page 31

Page: 31 / 240

Fig. 1-18 Focusing point selection, registration, and shifting.

1-29

Part 1: General Information

Standard

CF-13-1,2

CF-13-3

Standard
Focusing Point
Selection

Focusing Point
Registration

Shifting to the Registered F

ocusing P

oint

and A

utomatic Selection/Center F

ocusing P

oint Selection

Standard
Setting

CF-11-2

CF-18-1

CF-18-2

Selectable
Focusing
Points

Shift to registered focusing point

Focusing point selection

Hold down the Assist
button, then press
FEL to register
the focusing point.

Automatic selection

Shift to registered focusing point

Press the button to shift to the registered
focusing point.
Release the button to return to the original
focusing point.

and
registration
are enabled

Procedure is the
same as left.

Eleven focusing points
are user-selectable and
automatic selection
can be registered.

+FEL

During SW1 or SW2,
press the focusing
point selector.

Automatic
selection

During SW1 or SW2,
press the focusing
point selector.

Not possible.

Center focusing point selected.

Press the button to select
the center focusing point.
Release the button to return to the
original focusing point.

Assist

button

Same as left.

: User-selectable focusing points.

With CF-11-2:
+/- Assist button
With CF-11-3:
FEL Assist button

* To register a focusing point, you press the Assist button and FE lock button simultaneously. However, if the

Speedlite is ready and you press the FE lock button first, FE lock will result and the focusing point selection mode
will be canceled. The Assist button must be pressed before the FE lock button.

Summary of Contents for EOS 1V

















































































































































































































































Search results

Summary of Contents for EOS 1V

Reviews:

Canon EOS 1V, Service Manual, Page: 31 / 240

Search results

Summary of Contents for EOS 1V

Reviews: