Canon EOS 1V, Service Manual, Page: 196 / 240

1.2 S
OFTWARE OVERVIEW
1) EOS-1V Remote
This program is used for EOS-1V customization, shooting data downloading, select-
ing the shooting data items to be recorded, setting the film ID, setting the date and
time, and other functions.
(1) Customizable functions
Thirty-one P.Fn (Personal Functions) can be set (see Table 1-1). The settings and
descriptions are displayed on-screen (Fig. 1-4). The help menu also explains the
effects of the Personal Functions. (P.Fn-0 is set with a Custom Function.) The
Personal Function settings can be saved in the personal computer and read by the
camera later. The Combination dialog box (Fig. 1-5) lists the descriptions of Personal
Function settings. (This is also possible for Custom Function settings.)
The Personal Functions set with the EOS Link Software ES-E1 can be enabled or
disabled with the EOS-1V individually. However, the P.Fn setting itself cannot be
changed with the EOS-1V.
Part 1: Product Overview
1-2
Fig. 1-4 Personal Function setting
dialog box.
Fig. 1-5 Combination dialog box.
Table 1-1 List of Personal Functions
P.Fn No. Function
0 Registers custom function groups.
1 Disables unwanted picture-taking mode(s).
2 Disables unwanted metering mode(s).
3 Specifies the metering mode for manual exposure.
4 Sets the maximum and minimum shutter speeds to be used.
5 Sets the maximum and minimum apertures to be used.
6 Registers and switches the picture-taking mode and metering
mode.
7 Repeats AEB during continuous shooting.
8 Sets AEB only for the first two frames.
9 Changes the AEB sequence for C.Fn-9-2/3 to overexposure, cor-
rect exposure, and underexposure.
10 Retains the program shift amount.
11 Prevents cancellation of multiple exposures.
12 Sets the AI Servo AF's subject-tracking sensitivity.
13 AI Servo AF continuous shooting is executed according to the film
advance speed.
14 Disables AF lens driving for focus search.
15 Disables the AF-assist beam from being emitted.
16 Enables the picture to be taken automatically when focus is
achieved at the fixed point of focus while the shutter button is
pressed completely.
17 Disables automatic focusing point selection.
18 Enables automatic focusing point selection when C.Fn-11-2 has
been set.
19 Sets the shooting speed of the various film advance modes for
when the Power Drive Booster is attached.
20 Limits the number of frames exposed during continuous shooting.
21 Enables silent (low-speed) film rewind when the shutter button is
OFF after picture-taking.
22 Disables the shutter release when film has not been loaded.
23 Changes the function activation timer after the button is pressed to
a different time length (6 sec., 16 sec., etc.).
24 Keeps the LCD panel illuminated during bulb exposures.
25 Changes the default settings for when the CLEAR button is ON.
26 Shortens the shutter release time lag.
27 Reverses the rotational function of the electronic dial.
28 Prevents exposure compensation with the Quick Control Dial.
29 Issues a warning when there is enough memory to store shooting
data for only a few more rolls of film.
30 Changes the imprinting density of the film ID.