manualshive.com logo in svg

Canon EOS 1V, Service Manual, Page: 29 / 240

Share
Download
Canon EOS 1V Service Manual Download Page 29

12-16  Dimensions: 

161 (W) 

×

120.8 (H) 

×

70.8 (D) mm (Body thickness:

54.8 mm)
6.34 (W) 

×

4.72 (H) 

×

2.79 (D) in (Body thickness: 2.16

in.)

12-17  Weight: 

945 g (add 40 g for the lithium battery)
33.3 oz. (add 1.41 oz. for the lithium battery)

13. Major Accessories

13-1  New accessories:

(1) EOS Link Software ES-E1
(2) MACRO RING LITE MR-14EX
(3) EOS-1V standard grip GR-E2 (Also attachable to

EOS-1N, EOS-1, and EOS-3)

(4) Laser Matte focusing screen with Area AF ellipse
See “6. Accessory Compatibility (Compatible System
Accessories).”

14. Misc.

14-1  Battery service life testing conditions

q

Batteries used: 

Primary battery is new (less than 3 months old)
Secondary battery is fully charged.

w

Lens: 

EF 50mm f/1.4 USM

e

Shooting mode: 

Shutter speed-priority AE (at 1/1000 sec.)

r

Subject brightness: EV 15

t

Film advance mode: Continuous

y

Film rewind mode: Standard (CF-1-0)

u

AF mode: 

AI Servo AF

i

SI display: 

On (Standard CF-10-0)

o

Film: 

Kodak Tri-X, 36-ex. (fresh roll)

!0

Shooting conditions: The following operation sequence was executed as

described below: AF search (infinity to near focus to
infinity), shutter button pressed halfway for 6 sec.,
shutter released, and meter active for 2 sec.

●

At 20°C

Film loaded, continuous shooting of 36 frames, auto-
matic film rewind, film cartridge removed, 20-sec.
break, stop down to f/5.6 for 5 sec., depth-of-field pre-
view.

●

At -20°C

After the camera and film were exposed to a tempera-
ture of -20°C for three hours, the following operation
was executed: Film loaded, continuous shooting of 5
frames at 20-sec. intervals until 36 frames exposed
(the last frame is exposed singly), automatic film
rewind, film cartridge removed, and 20 sec. break, stop
down to f/5.6 for 5 sec., depth-of-field preview, and 3-
min. break.
* One roll is considered to be one whose film was

advanced and rewound completely. Specifications for
24-exposure are interpolated from 36-exposure
results.

13-2  Major EOS

System
Accessories:

1-27

Part 1: General Information

Summary of Contents for EOS 1V

















































































































































































































































Reviews:

No comments