Canon EOS-1V HS Instructions Manual Download Page 64

Page: 64 / 143

Depth-of-field AE

• To further increase the depth of field, use a wide-angle lens.
• Setting dEP points 1 and 2 at the same point on the subject will make the

depth of field shallow. The foreground and background will then be blurred,
making the subject stand out. Using a telephoto lens enhances this effect.

• With automatic focusing point selection in the depth-of-field AE mode, only the

center focusing point will be used for focusing.

• If a slow shutter speed has been set, use a tripod to prevent camera shake.
• If six seconds elapse before you complete the DEP procedure, the DEP

point(s) set so far will be canceled. In such a case, you must start over again.

• To cancel the depth-of-field AE mode midway, press the <

> button,

> button, or <

> button.

SEC.05 P055-082 (E) 28-01-2003 16:14 Pagina 64

Summary of Contents for EOS-1V HS
















































































































































Search results

Summary of Contents for EOS-1V HS

Reviews:

Related manuals for EOS-1V HS

Brands by name

Popular brands

Canon EOS-1V HS, Instructions Manual

Search results

Summary of Contents for EOS-1V HS

Reviews:

Related manuals for EOS-1V HS

Brands by name

Popular brands