Canon EOS-1V HS Instructions Manual Download Page 41

Page: 41 / 143

Focusing Point Selection

Selecting the center focusing
point

• Press the <

> button and press the

> button.

The center focusing point will be
selected.

When you select spot metering, it will be linked to the selected focusing point.
(

→

p.52)

The manual selection method can be altered as follows:

(1) C.Fn-11-1 gives the <

> button the function of the <

> button.

(

→

p.105)

(2) C.Fn-11-2 gives the <

> button the function of the <

> button. The

> dial can also be used
by itself. (

→

p.105)

(3) C.Fn-11-2 can switch manual focusing point selection to automatic

selection. (

→

p.105)

(4) C.Fn-11-3 gives the <

> button the function of the <

> button.

C.Fn

With C.Fn-18, you can select the center focusing point by pressing (and
releasing) or holding down the <

> button. (

→

p.109)

C.Fn

SEC.03 P033-048 (E) 28-01-2003 16:04 Pagina 41

Summary of Contents for EOS-1V HS
















































































































































Search results

Summary of Contents for EOS-1V HS

Reviews:

Related manuals for EOS-1V HS

Brands by name

Popular brands

Canon EOS-1V HS, Instructions Manual

Search results

Summary of Contents for EOS-1V HS

Reviews:

Related manuals for EOS-1V HS

Brands by name

Popular brands